Leave Your Message
Preformed Permanent Pavement Marking Tapes (Reflective Surface)

Permanent Road Marking Tapes

Preformed Permanent Pavement Marking Tapes (Reflective Surface)

Preformed Reflective Permanent Pavement Marking Tapes are a new type of road traffic marking that can be directly installed on roads. it combines flexible polymer,high-refractive glass beads, wear-resistant layers, substrates, release film, and other components.

    Product Information

    Brand: Color Road
    Item No.:L5010X(without adhesive backing),L5011X(with adhesive backing)
    Color: white, yellow, red, blue, black, green

    Product Features

    --Preformed reflective marking tape, which can be made into any specification according to customer requirements.
    --The base material and the product's surface have glass beads with good reflective and anti-slip properties. It also has strong wear resistance, good weather resistance, and durability.
    --Applicable to concrete, asphalt, cement, marble, epoxy floor, and other road surfaces and walls of various materials.it is convenient and fast construction and so on. Widely used in various highways and graded roads.
    --Can be made into various marking lines, arrows, words, patterns, colored sign markings on road surfaces, colored three-dimensional signs, and pipeline signs.
    --Depending on the condition of the road surface, traffic flow, and installation, the service life can be at least 2 years.

    Product size reference chart

    Product number Standard Length(m) Standard Width(cm) Thickness(mm) Weight(±10%) Conventional packaging Adhesive
    L5010X 40M 5,10,15,20, within 100 customizable 1.3-1.8MM 2.2kg/sqm 300*300*300MM without adhesive backing
    L5011X 40M 5,10,15,20, within 100 customizable 1.6-2.2MM 2.4kg/sqm 300*300*300MM with adhesive backing

    Technical Indicators

    Properties

    Typical data

    Unit

    Test Methods

    L50111

    L50112

    ________

    ________

    Color

    white

    yellow

    ________

    ________

    Thickness

    1.8

    1.8

    mm

    GB/T 7125

    Water resistance

    pass

    pass

    ________

    GB/ T24717

    Acid resistance

    pass

    pass

    ________

    GB/T 24717

    Wear-resistant

    40

    40

    mg

    GB/T24717

    Retroreflection

    >250; >500

    >175; >300

    mcd/m 2 /lux

    GB/T24717

    Minimum adhesion

    25

    25

    N/25mm

    GB/T24717

    Anti-skid value

    45

    45

    BPN

    GB/T24717

    Instructions

    1. The pavement marking tape without adhesive backing is commonly used in special environments and special materials, using special glue, such as two-component AB glue, 502 glue, etc.
    2. The products with adhesive backing can be divided into ground brush primer and ground primer without brush according to the usage:
    Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer when used indoors, on outer pavement, and on various walls of place such as workshops, exhibition halls, squares, safety islands of toll stations, where few vehicles run over, it only needs rip off the isolated paper on the back of the product and sticks it directly to the joint surface. And its life can be 5 years to the longest.
    Brush primer on the ground: It should be applied with primer on uneven surfaces or walls(e.g., Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.

    description2